Pronet Shadeports and Carports Installers

Is a 20x20 Carport Big Enough for Two Cars?

A 20x20 carport can fit two passenger cars side by side, provided its clear internal space allows safe door opening. That is 20 feet by 20 feet, approximately 6.1m x 6.1m. Pronet Shadeports & Carports Gauteng assesses vehicles, posts and driveway access before recommending a double shadeport or steel carport.

Is a 20x20 carport big enough for two cars? Pronet shadeport guide

Key Takeaways

  • 20x20 means feet: approximately 6.1m x 6.1m.
  • Two ordinary passenger cars may fit, subject to usable clearances.
  • Large SUVs, bakkies and child-seat access can require more space.
  • Post positions matter as much as roof dimensions.
  • Allow for foundation preparation and the advised 3 to 7 day curing interval.
  • Check municipal and estate approval before construction.

Is a 20x20 Carport the Same as a 6x6 Carport?

They are close in size, but they are not identical. Twenty feet equals 6.096 metres, giving a square footprint of about 37.16m². A 6m x 6m structure covers 36m². Confirm whether the quotation describes the roof, outside frame or clear opening between posts.

The deciding factor is how the space works with both vehicles parked. Mirrors, open doors, a child seat and a raised tailgate all need room. A roof covering two cars does not guarantee comfortable daily access.

Use the carport sizing guide to compare alternative layouts before committing to a footprint.

Check the Space Between Both Cars

Measure each vehicle with its mirrors extended, then add the space needed between the cars and along both outside edges. Test this arrangement on the driveway with chalk or tape. Open the doors as passengers normally use them, rather than squeezing through a narrow gap.

For illustration, two vehicles each measuring 2m across their mirrors use 4m of width. Within a genuinely clear 6.096m opening, that leaves 2.096m shared between the central gap and both outside edges. This is an arithmetic example, not a recommended minimum or a promise that doors will clear.

Vehicle combination20x20 suitabilityCheck first
Two compact carsOften a workable starting pointDoor opening and posts
Sedan and SUVDepends on actual dimensionsPassenger access and tailgate
Two large SUVs or bakkiesMay need a wider or longer designMirrors, load bays and turning
Wheelchair or frequent child-seat accessPlan around the access taskTest the full transfer or loading space

How to Measure the Driveway

  1. Width: Measure the cars mirror to mirror. Open the doors to the position normally used and mark the total width.
  2. Length: Allow room for the bonnet, boot or tailgate to open without hitting a wall or extending beyond the cover.
  3. Height: Measure the tallest vehicle with roof racks, boxes or other accessories fitted. Check the lowest beam and open tailgate.
  4. Access: Check the gate swing, sliding-gate travel, garage entrance, pedestrian path and turning route.

On a sloping driveway, clearance changes along the approach. Measure the vehicle path as well as the final parking position. A design that clears a stationary roof rack may still interfere with it while the vehicle climbs the driveway.

Shade Net, Steel or Cantilever?

Choose carport shade for the protection required. Shadeports reduce direct sunlight and retain airflow, which suits exposed parking. Standard knitted shade cloth is permeable and does not make a dry loading area during rain.

Option Useful feature Planning consideration
Shade net Sun reduction and ventilation Allow for the fabric profile and supporting cables
Steel IBR or Chromadek roof Solid cover that sheds rain Plan roof fall and drainage away from entrances
Cantilever configuration Moves posts away from one side of the parking area Requires a frame and foundations designed for the span

For double carports, removing a post from the door opening can be more useful than increasing the roof width. A wall-mounted design also needs confirmation that the existing building can support the proposed fixing arrangement.

20x20 Carport Prices: Compare the 6x6 Baseline

The supplied estimates below cover standard metric configurations including VAT. A true 20ft x 20ft structure is slightly larger than 6m x 6m, so request its own written price.

Carport configuration Standard dimensions Estimated installed price, inc. VAT
Single shade net 3m x 6m R6,500 – R9,500
Double shade net 6m x 6m R11,000 – R16,000
Single steel, IBR / flat 3m x 6m R12,000 – R16,500
Double steel 6m x 6m R18,500 – R26,000
Double cantilever steel 6m x 6m R28,000 – R38,000

Prices are estimates for standard ground conditions in Sandton. Final pricing depends on site assessment, base preparation and exact structural requirements.

Custom spans, heavier steel, excavating through paving and difficult ground can increase the price. Confirm whether paving reinstatement, drainage work and approval costs are included.

The Fourways shade net pricing guide provides related local budgeting information.

Frame and Foundation Specifications

The supplied steel-carport baseline below must be checked against the chosen structure. It is not a universal specification for every shadeport or soil condition.

  • Framework: 100mm x 100mm square steel posts and 150mm lip channel main beams.
  • Solid roof: Supplied specification of SABS-approved 0.47mm IBR / Chromadek profile sheeting; confirm the product documentation in the quote.
  • Corrosion protection: Pre-galvanised frame or anti-rust primer with a UV-resistant topcoat.
  • Foundations: Concrete-poured post footings with a supplied baseline minimum depth of 450mm, subject to site-specific structural requirements.

Paving does not replace a structural footing. The installer must establish suitable ground below the surface and check buried services before excavation. A long cantilever or exposed site may need a different foundation and frame arrangement.

Installation and Curing Period

Foundation and pole preparation take place before the final structure is installed. Pronet advises allowing approximately 3 to 7 days for curing before final installation, depending on weather and the specified system. This interval is not a statement that concrete reaches its full design strength within seven days.

The free site inspection and quotation explain the full installation period, access needs and when vehicles can use the area again. Keep the excavation and curing area clear until the installer confirms it is ready.

Compare the Midrand installation and pricing information when planning work at a property there.

Do You Need Approval for a 20x20 Carport in Sandton?

The national minor-building-work definition includes an open-sided carport not exceeding 40m². A 20ft x 20ft footprint is about 37.16m², but this threshold does not automatically authorise construction. It comes from the National Building Regulations framework; SANS 10400 provides associated compliance guidance.

The City of Johannesburg’s building submission checklist lists open-sided shelters below 40m² as a submission category. Obtain the building control office’s property-specific requirements, including boundaries, servitudes and any wall attachment. Estate or body corporate consent is a separate requirement and cannot override municipal rules.

Plan Around Real Parking Problems

A South African community discussion about neighbouring car doors describes repeated scratches in assigned complex parking. This is an anecdote, not a Pronet project, but it shows why door clearance deserves a physical test before choosing two-car carports.

In Sandton, the inspection should check gate travel, pedestrian access and runoff on the actual property. A larger roof will not solve a post blocking the turning path. No nearby landmark changes the required vehicle clearances.

The Boksburg shadeport pricing guide provides a separate local comparison.

For properties farther east, the East Rand carport service page covers that service area.

A partly open vehicle shelter provides overhead cover without forming an enclosed garage. Across Gauteng province, the property layout and responsible municipality determine the next planning steps.

Frequently Asked Questions

Will two SUVs fit in a 20x20 carport?

Some combinations will, but measure both SUVs and test door and tailgate access. Two large vehicles may need extra width or length.

Does 20x20 mean metres?

In this carport size description it means feet. Twenty feet is 6.096 metres, so the footprint is approximately 6.1m x 6.1m.

Can posts reduce the parking space?

Yes. Outside roof dimensions can exceed the clear opening between posts. Ask for both measurements and the proposed post positions.

Is shade net waterproof?

Standard knitted shade net lets rain through. Choose a correctly designed solid roof and drainage arrangement when a dry loading area matters.

How long does installation take?

The full programme depends on the site and design. Pronet advises approximately 3 to 7 days of curing between foundation and pole preparation and final installation, subject to weather and the specified system.

Can a 20x20 carport be built without permission?

Do not assume so because its footprint is below 40m². Confirm municipal authorisation and any separate estate or body corporate requirements before work starts.

Confirm the Right Carport Size Before Ordering

Send Pronet the vehicle models, installation address and driveway photographs. A free site inspection will confirm clearances, post positions, foundations and the written price.

Shade Net Carport Examples

20x20 Carport Fit Checklist

20x20 carport fit checklist: dimensions, doors, posts and approval
Request a Quote